Skip to content
866-771-2345

Faux Brick Panels for a Bar or Kitchen Island

Basement bar with its front clad in stacked faux stone panels
Customer project: Earth’s Valley in Nature’s Spirit. See more in our project gallery.

The front of a bar or kitchen island is a small, very visible surface, and brick is a favorite for it. Real brick or thin brick means mortar, grout, drying time and a mess in the middle of the house. Tritan BP brick panels are lightweight polyurethane. A panel weighs about 8 pounds, cuts with a standard saw and goes up with construction adhesive and screws. There is no mortar, and no waiting for it to cure.

Prefer stone? Our stone panels work here too.

Example project: A 6 ft × 3.5 ft island front is 21 sq ft. At about 6.9 sq ft per Aged Brick panel, that is about 4 panels before cuts. The calculator adds an allowance for cuts. Use the panel calculator →

Recommended products

We make three brick collections. They are Aged Brick, British Brick and Cottage Lane. All three are rated for exterior use, so they also work on an outdoor bar or a patio kitchen. For a small area such as an island, the panels cover about 6.4 to 7 square feet each, so a few panels often go a long way.

Measure the front and any returns, enter them in the calculator and it gives you a count with an allowance for cuts. Order samples of the brick colors and hold them up under your own lights and next to your countertop. Brick reads very differently under warm kitchen lighting than it does on a screen.

Tips before you start

Start with a solid, flat face

Plywood, cement board and other solid, clean, flat surfaces work. Panels follow whatever is behind them.

Plan the corners

Brick corners show. Matching outside corners give a clean finish where the island turns.

Mind the counter edge

Use matching caulking for seams you cut, and finish the top edge cleanly where the panel meets the counter.

Peel-and-stick option

Stick-A-Stone is a peel-and-stick stone panel for interior walls, backsplashes and similar areas. It is stone, not brick. Check the product page.

Order it all at once

Pigments are applied by hand, so a later batch may not match the first.

Keep heat away

The panels are good for about 300 degrees F at most. Keep them away from direct flame and follow appliance clearances.

Where to start

Work out your wall and see the color first

Use the panel calculator → Enter your measurements and it tells you how many panels you need, with an allowance for cuts. You can also see the stone on a photo of your own wall.

Order a $15 sample → The sample ships free, and the $15 comes back as store credit when you order panels. Rather talk to someone? Call or text 866-771-2345, Monday to Friday, 8:30 AM to 5:00 PM ET, or email support@tritanbp.com.

Your Cart

Standard shipping $12.95 on orders under $60, $19.95 from $60 to $249.99, free on orders of $250 or more (lower 48). Samples ship free.


Your Cart is empty
Let's fix that

Your Wishlist